Sunday, June 24, 2012

First Alert SA303B Battery Powered Ionization Smoke Alarm with Silence Feature

First Alert SA303B Battery Powered Ionization Smoke Alarm with Silence Feature Review



About the First Alert SA303B Battery Powered Ionization Smoke Alarm with Silence Feature With its incorporated, single-push silencing button, the First Alert SA303B Battery Powered Ionization Smoke Alarm w/ Silence Feature is the best solution on the market, especially when it comes to quickly silencing non-dangerous alerts. This unit comes complete with a nine-volt battery and an ionization sensor, and it is approved for us in recreational vehicles. The First Alert SA303B also has two locking mechanisms, giving you the ability to lock the battery drawer and alarm to the base. Another great feature of the Battery Powered First Alert SA303B Ionization Smoke Alarm w/ Silence Feature is that it can be used with BRK, and it has a temperature range of 40 to 100 degrees F. Plus, the unit's humidity range is 10 percent to 95 percent relative humidity, which makes it highly functional no matter the level of humidity in your spaces. The First Alert SA303B Smoke Alarm meets


Thursday, June 21, 2012

Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector

Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector Review



Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector Feature

  • Wireless photoelectronic smoke / heat / freeze detector
  • Intended for use with Honeywell wireless burglar alarm.
Honeywells 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).


New - FIRST ALERT SCO403 SMOKE ALARM & CARBON MONOXIDE DETECTOR COMBO PACK - SCO403

New - FIRST ALERT SCO403 SMOKE ALARM & CARBON MONOXIDE DETECTOR COMBO PACK - SCO403 Review



CARBON MONOXIDE DETECTOR WITH ELECTROCHEMICAL SENSOR; SMOKE ALARM WITH IONIZATION SMOKE SENSOR; SIMPLE TO USE SILENCE/TEST BUTTON; LOW BATTERY WARNING; END-OF-LIFE TIMER; LOUD 85 DECIBEL ALARM; CONVENIENT FRONT BATTERY ACCESS; INCLUDES 2 AA BATTERIES FOR CARBON MONOXIDE DETECTOR & 9V FOR SMOKE ALARM; 5-YEAR LIMITED WARRANTY


Sunday, June 10, 2012

First Alert Onelink Wireless Interconnected Smoke Alarm SA501CN-3ST

First Alert Onelink Wireless Interconnected Smoke Alarm SA501CN-3ST Review



First Alert Onelink Wireless Interconnected Smoke Alarm (Sa501cn3St). Allows alarms to talk with each other When one alarm sounds all alarms will sound Install in bedroom, hall, basement 914 MHZ 3 channels (special code will not interfere with portable telephone computers, etc.) Includes 2 "AA" batteries Single test/silence button Intelligent sensor reduces nuisance alarms Photoelectric smoke sensor Microprocessor automatically performs internal test 10 year warranty


Friday, June 8, 2012

First Alert SA302LCN 9V Lithium Battery Powered Photoelectric/Ionization Smoke Alarm

First Alert SA302LCN 9V Lithium Battery Powered Photoelectric/Ionization Smoke Alarm Review



About the First Alert SA302LCN 9V Lithium Battery Powered Photoelectric/Ionization Smoke Alarm Sometimes, nothing can be more annoying that constantly maintaining the smoke alarms in your home. If you're searching for a way to save some time, the First Alert 9V Lithium Battery Powered Photoelectric/Ionization Smoke Alarm may be just what you're looking for. Built with careful quality and powered by a 9V lithium battery, the First Alert SA302LCN can be maintenance-free for years. The system has a one-touch silence and test button built in, but one of the great features of the First Alert SA302LCN is that it comes with a remote to silence unwanted alarms and to perform test functions. Built-in Intelligent Sensing Technology makes the First Alert SA302LCN an ideal system for homes with small children and the elderly because it controls the number of unwanted alarms. The photoelectric and ionization sensors help ensure the highest level of protection, making the First Alert S


Wednesday, June 6, 2012

First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup * BOX OF 12 *

First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup * BOX OF 12 * Review



First Alert SC9120B Hardwire Combination Smoke/Carbon Monoxide Alarm with Battery Backup * BOX OF 12 * Feature

  • Hardwire Combination Smoke
  • Carbon Monoxide Alarm
  • Battery Backup
The BRK hardwire combination smoke and carbon monoxide alarm detects two hazards with one simple unit. Carbon monoxide (CO) is a colorless, odorless, deadly gas. It can be emitted by sources including gas or oil furnaces, gas clothes dryers, water heaters, fireplaces, wood stoves, charcoal grills, gas ranges, and space heaters. A clogged chimney, improper venting, and attached garages can also cause carbon monoxide accumulation. According to the Consumer Product Safety Commission (CPSC), at least one CO alarm should be installed near a home's sleeping area. The BRK SC9120 hardwire combination smoke and CO alarm with battery backup includes these features: Quick plug-in power connector for easy installation. 120-volt AC inter-connectable (with maximum 18 compatible devices). The alarm can be interconnected with up to 12 other compatible smoke alarms and six compatible devices like bells, horns, repeaters and door closers. If one unit triggers an alarm, all smoke alarms in the series will sound. Power indicators show which unit in the series initiated the alarm. Ionization sensor which is more effective at detecting flaming fires which consume combustible materials rapidly and spread quickly. Microprocessor controlled for fewer nuisance alarms. Single test/silence button which both silences a non-threatening alarm or low battery warning and allows you to test the unit's functionality. Automatically performs internal test of functionality. Latching alarm indicator which automatically identifies which unit initiated the alarm. Separate smoke and carbon monoxide visual and audible warnings. Battery drawer lock and mounting bracket lock for tamper resistance. AC power indicator and alarm indicator light. Low battery warning "chirp" and missing battery tab. 9-volt battery backup for peace of mind during power outages.


Friday, June 1, 2012

Safe-T-Alert SURFACE MT 12V RV/CO Alarm BROWN, 65-541

Safe-T-Alert SURFACE MT 12V RV/CO Alarm BROWN, 65-541 Review



Safe-T-Alert Alarm CO Alarm 65-541 Surface Mount 12V Direct Wire The updated 65-541 Safety Alert carbon monoxide sensor is an rv alarm that is a safety device that is an essential RV accessory. The carbon monoxide alarm sounds when the RV or trailer has a carbon monoxide leak . Carbon monoxide is an odorless gas that is a by-product of burning propane, natural gas, wood or any other carbon based fossil fuel. Illness and death come from faulty vehicle exhaust systems, lp gas furnaces or propane gas ranges. This CO monitor is approved for use in all RV's, motor homes, campers, trucks, buses for as a CO detector to detect and warn of hazardous carbon monoxide . Choose the Safe-T-Alert 65-541 brown surface mount carbon monoxide alarm as a direct replacement for the CCI Controls 3400.094 or 3400.0 12 volt carbon monoxide monitor to keep your RV, trailer or motor home safe. Note: the 65-541 replaces the earlier model 60-541. The clam shell insert may not indicate the model change. This12 volt carbon monoxide detector is made in the USA. Travel in safety and have complete piece of mind, day or night. Install it and worries about gas fumes and leakage are eliminated. SafeTAlert 12V CO Monitor & Alarm 65-541 Features: Fully Operational When CO Alarm is Muted: Mute does not override detection circuit, giving you full time protection as you ventilate your vehicle. Memory Scan. Retains CO level that activated the alarm . After ventilation, the memory saves the carbon monoxide level. Micro Current Technology. Saves precious battery power. Two Level Carbon Monoxide Alert: Caution Alarm (60 ppm) and Hazard Alarm (at or above 100 ppm). Maintenance free sensor. Loud 85 dB Alarm. Test/Reset Button. Used to temporarily silence alarm during ventilation. Tests all detector functions and activates Memory Scan. Hard Wires to 12 Volt Power UL Listed: UL 2034-2003 for Recreational Vehicles and Unconditioned Areas, including May 14, 2003 & Nov. 14, 2003 revisions Meets RV standard ANSI